Using the SC
1. To turn on the SC, firmly press and hold the center ON/OFF button for 2 seconds at the bottom.
2. Press and release the ON/OFF button at the bottom to switch speeds, up to speed 3.
3. Press the button at speed 3 to enter the ready mode(Speed 0). and the device will slow down from speed 3 to speed 0.
4. The SC should be used with the attachment making perpendicular contact with the skin. Only the attachment of the device should make contact with the skin or area you are treating.
5. To turn off the SC, long Press the ON/OFF button at the bottom at any mode, until the device shuts down. And it will shut down automatically without use for 15 seconds.
Connecting the Attachments
Align the attachment with the round hole in front of the massage gun and rotate the head slightly instead of plugging in.
To remove, grip the attachment, rotating it out.. Pull off the attachment. U-shaped massage head is equipped with an alignment line, it can be directly plugged in/out when aligned. Please install and remove the massage head in the power-off state.
Charging
Plug the charging wire into the charge port at the bottom of the massage gun handle, and connect the power supply to start charging. Charging is complete once the three lights all light up.